Home > Dynalco
Choose a sub category:
Magnetic Pick-ups Speed Sensors Engine & Emissions Controls
Speed Switches & Transmitters Instruments/Gauges/Meters Tape
Magnetic Pickups/Speed Sensors
We offer the largest selection of variable reluctance sensors for speed
and direction sensing as well as flow, power, counting, timing and
synchronization.
Sort By:
Page of 1
Tach Tape Dynalco Tach Tape 10-in

Provide speed and frequency measurements without large split gears, slotted shafts, holes drilled in flywheels, or other clumsy make-do arrangements, even on a smooth shaft or wheel. Saves time and expense.

List Price: $82.60
Our Price: $72.60
Sale Price: $72.60
Savings: $10.00
Cable/connector assembly for 2-pin magnetic pickups, shielded, straight clamp, MS 3106A-10SL-4S connector, 10 feet cable length. Dynalco Connector Kit Shielded Cable Straight Clamp 2pin 10 ft

The Dynalco Cable/connector assembly for 2-pin magnetic pickups, shielded, straight clamp, MS 3106A-10SL-4S connector, 10 feet cable length.

List Price: $120.00
Our Price: $107.00
Sale Price: $107.00
Savings: $13.00
Magnetic Pickup/Speed Sensor 1.125-in Standard Reach Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 1.125" thread x 2.250", standard reach, standard sensitivity

The Dynalco M101 Magnetic Pickup/Speed Sensor is a high quality speed sensor that features a standard reach of 1.125-inches and comes with 5/8-18 thread. This standard magnetic pickup has standard sensitivity which makes it suitable for high speed (>500 rpm), large gear (>12 inch diam.) applications.

List Price: $168.00
Our Price: $158.00
Sale Price: $158.00
Savings: $10.00
5/8-18 x 2.500" thread x 3.625" - medium reach, standard sensitivity Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 2.500" thread x 3.625" - medium reach, standard sensitivity

The Dynalco M151 Magnetic Pickup/Speed Sensor features a medium reach of 2.5-inches and 5/8-18 thread. This high quality sensor has standard sensitivity which makes it ideal for for higher speed (>500 rpm), larger gear (greater than 2 inch diam.) applications.

List Price: $183.00
Our Price: $173.00
Sale Price: $173.00
Savings: $10.00
Magnetic Pickup/Speed Sensor 5/8-18 x 1.125" thread x 2.250" - standard reach, high sensitivity Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 1.125" thread x 2.250" - standard reach, high sensitivity

This Sensor is a standard magnetic pickup has high sensitivity which makes it good for mid-speed, large gear applications.

List Price: $183.00
Our Price: $173.00
Sale Price: $173.00
Savings: $10.00
Magnetic Pickup/Speed Sensor 5/8-18 x 1.125" thread x 2.250" - std reach M102, high sensitivity, intrinsically safe, CSA Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 1.125" thread x 2.250" - std reach M102, high sensitivity, intrinsically safe, CSA

The Dynalco M202 Magnetic Pickup/Speed Sensor has a low output making it essentially safe to use in very dangerous environment.This CSA approved magnetic pickup features a standard reach of 1.125 inches and 5/8-18 thread. It also comes in high quality stainless steel housing.

List Price: $198.00
Our Price: $194.00
Sale Price: $194.00
Savings: $4.00
Magnetic Pickup/Speed Sensor 5/8-18 x 2.500" thread x 3.625", active sensor, zero velocity, TTL output (5-15VDC Input Power) Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 2.500" thread x 3.625", active sensor, zero velocity, TTL output (5-15VDC Input Power)

The Dynalco M928-24 Magnetic Pickup/Speed Sensor is the 24V VDC version of the Dynalco M928 standard model. This active magnetic pickup features a medium reach of 2.500 inches and a 5/8-18 thread. It also has a digital TTL output suitable for zero velocity applications.

List Price: $229.00
Our Price: $219.00
Sale Price: $219.00
Savings: $10.00
Magnetic Pickup/Speed Sensor 5/8-18 x 4.000" thread x 5.125" - long reach M101, standard sensitivity Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 4.000" thread x 5.125" - long reach M101, standard sensitivity

The Dynalco M131 Magnetic Pickup/Speed Sensor is a standard magnetic pickup with standard sensitivity long reach of 4.000-inches and has 5/8-18 thread. This high quality speed sensor also has a temperature range of -65 to 222°F.

List Price: $234.00
Our Price: $224.00
Sale Price: $224.00
Savings: $10.00
Magnetic Pickup/Speed Sensor 5/8-18 x 4.000" thread x 5.125" - long reach M102, high sensitivity Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 4.000" thread x 5.125" - long reach M102, high sensitivity

The Dynalco M133 Magnetic Pickup/Speed Sensor is a high quality speed sensor that features a long reach of 4.000-inches and 5/8-18 thread.
This high sensitivity magnetic pickup is suitable for lower speed (300 to 500 rpm) applications.

List Price: $266.00
Our Price: $255.00
Sale Price: $255.00
Savings: $11.00
5/8-18 x 2.500" thread x 3.625" - medium reach, power output, zener limited, intrinsically safe, CSA Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 2.500" thread x 3.625" - medium reach, power output, zener limited, intrinsically safe, CSA

The zener-limited output of this magnetic pickup makes it intrinsically safe and CSA approved. It produces output even at low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a medium reach (2.5 inches) and a 5/8-18 thread.

List Price: $270.00
Our Price: $260.00
Sale Price: $260.00
Savings: $10.00
Magnetic Pickup/Speed Sensor 3/4-20 x 2.000" thread x 3.063" - medium reach, intrinsically safe, CSA Dynalco Magnetic Pickup/Speed Sensor 3/4-20 x 2.000" thread x 3.063" - medium reach, intrinsically safe, CSA

The Dynalco M139 Magnetic Pickup/Speed Sensor is a magnetic pickup that features low output making it intrinsically safe and CSA approved.
This high quality speed sensor also features a medium reach of 2.000 inches with 3/4-20 thread

List Price: $285.00
Our Price: $275.00
Sale Price: $275.00
Savings: $10.00
Magnetic Pickup/Speed Sensor 4-in and a 5/8-18 thread Dynalco Magnetic Pickup/Speed Sensor 4-in and a 5/8-18 thread

The Dynalco M231 Magnetic Pickup/Speed Sensor is a magnetic pickup that features a long reach of 4.000-inches and a 5/8-18 thread. It produces low output making it intrinsically safe and CSA approved. Comes in a high quality stainless steel housing with a length of 5.125-inches. Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.

List Price: $285.00
Our Price: $275.00
Sale Price: $275.00
Savings: $10.00
Magnetic Pickup/Speed Sensor 5/8-18 x 4.000" thread x 5.125" - long reach, power output, zener limited, intrinsically safe, CSA Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 4.000" thread x 5.125" - long reach, power output, zener limited, intrinsically safe, CSA

This magnetic pickup features a zener-limited output making it essentially safe and CSA approved. Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.

List Price: $291.00
Our Price: $281.00
Sale Price: $281.00
Savings: $10.00
Magnetic Pickup/Speed Sensor 5/8-18 x 4.000" thread x 5.125" - long reach M102, high sensitivity, intrinsically safe, CSA Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 4.000" thread x 5.125" - long reach M102, high sensitivity, intrinsically safe, CSA

The Dynalco M233 Magnetic Pickup/Speed Sensor is a magnetic pickup that produces low output making it essentially safe and CSA approved. It features a long reach of 4.000-inches and a 5/8-18 thread. Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly.
Part number: M233

List Price: $293.00
Our Price: $283.00
Sale Price: $283.00
Savings: $10.00
Intrinsic Safety Barrier for Magnetic Pickups Dynalco Intrinsic Safety Barrier for Magnetic Pickups

The Dynalco ISB-101 Intrinsic Safety Barrier for Magnetic Pickups is a high quality energy limiting device for magnetic pickups, CSA Class I, Division 1, Groups C & D. It is designed to be used in a safe area to isolate and receive electrical signals from an intrinsically safe Dynalco magnetic pickup mounted in a hazardous location.

List Price: $300.00
Our Price: $296.00
Sale Price: $296.00
Savings: $4.00
Speed Switch Dynalco Speed Switch

Reliable engine overspeed protection. Overspeed relay plus a second setpoint for crank disconnect, generator field- flashing, or other alarm. Full field programming capability.

List Price: $300.00
Our Price: $296.00
Sale Price: $296.00
Savings: $4.00
Magnetic Pickup/Speed Sensor 5/8-18 x 2.500" thread, 3.625" - medium reach M134, standard sensitivity Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 2.500" thread, 3.625" - medium reach M134, standard sensitivity

The Dynalco M189 Magnetic Pickup/Speed Sensor is a standard magnetic pickup that features a medium reach of 2.500-inches with 5/8-18 thread. This magnetic pickup has standard sensitivity which makes it perfect for high speed (>500 rpm), larger gear (>2 inch diam.) applications.

List Price: $326.00
Our Price: $316.00
Sale Price: $316.00
Savings: $10.00
Digital Tachometer Signal-Powered Unlighted Display Dynalco Digital Tachometer Signal-Powered Unlighted Display

The Dynalco SPD-100 Signal-Powered Digital Tachometer is a solid-state tachometer that features a 4-digit, unlighted LCD display with gate time range of 0.26 to 5.70 seconds, field- programmable. This well-sealed signal-powered tachometer is designed for rugged indoor and outdoor applications.

List Price: $420.00
Our Price: $418.00
Sale Price: $418.00
Savings: $2.00
5/8-18 x 1.500" thread x 2.750" - 30" lead, intrinsically safe, UL / CSA / ATEX, XP housing Dynalco Magnetic Pickup/Speed Sensor 5/8-18 x 1.500" thread x 2.750" - 30" lead, intrinsically safe, UL / CSA / ATEX, XP housing

The Dynalco M180 Magnetic Pickup/Speed Sensor is a magnetic pickup that features a explosion proof housing which makes it suitable for dangerous environments. This magnetic pickup comes with 5/8-18 thead and a standard reach of 1.500-inches. It is best suited for use in standard temperature, mid speed (300 to 500 rpm), larger gear (>2 inch diam) applications.

List Price: $428.00
Our Price: $418.00
Sale Price: $418.00
Savings: $10.00
3/4-20 x 1.875" thread x 3.125" - 30" lead, intrinsically safe, UL/CSA/CENELEC, XP housing Dynalco Magnetic Pickup/Speed Sensor3/4-20 x 1.875" thread x 3.125" - 30" lead, intrinsically safe, UL/CSA/CENELEC, XP housing

The Dynalco M104 Magnetic Pickup/Speed Sensor is a magnetic pickup that features an explosion proof housing making it ideal for dangerous environments. This high quality speed sensor has a medium reach of 1.875-inches and comes with 5/8-18 thread. It is also includes leads and has UL/CSA approved for standard temperature.

List Price: $428.00
Our Price: $418.00
Sale Price: $418.00
Savings: $10.00
Digital Tachometer Signal-Powered Unlighted Display Dynalco Digital Tachometer Signal-Powered Lighted Display

The Dynalco SPD100L Signal-Powered Digital Tachometer is a solid-state digital tachometer gauge that features a 4-digit, lighted LCD display  with gate time range of 0.13 to 2.85 seconds field-programmable. This intrinsically safe tachometer is well sealed and designed for rugged indoor and outdoor applications.

List Price: $530.00
Our Price: $520.00
Sale Price: $520.00
Savings: $10.00
SST-2000A Speed Transmitter Dynalco SST-2000A Speed Transmitter

The Dynalco SST-2000A Speed Switch/Transmitter is a STT-2000 series unit that receives signal input from a passive or active magnetic pickup, shaft encoder, contact closure, flowmeter, etc. to provide proportional analog outputs.

List Price: $575.00
Our Price: $565.00
Sale Price: $565.00
Savings: $10.00
Tachometer 5-Digit Hourmeter Trip Dynalco Tachometer 5-Digit Hourmeter Trip

The MTH-103E is a newer version of the MTH-103D. The function, package size and wiring are the same although the MTH-103E has a keypad that replaces the old push button, making programming easier and quicker.

List Price: $580.00
Our Price: $571.00
Sale Price: $571.00
Savings: $9.00
Catalyst Monitor Dynalco Catalyst Monitor

The Dynalco Catalyst Monitor is a CSA approved catalyst monitor designed
for catalyst monitoring and data logging on Spark Ignited and Diesel
engines.

List Price: $816.00
Our Price: $806.00
Sale Price: $806.00
Savings: $10.00
   
 
We offer the largest selection of variable reluctance sensors for speed
and direction sensing as well as flow, power, counting, timing and
synchronization.